Blog

Set Descending Direction

2 Item(s)

  • 21.09.2019 0 Posted By yanzeo he

    How much do you know?

    Printer Frequently Asked Questions 1: Printing White Paper

    Process flow:

    1 Check if the paper used is a thermal paper.

    2 Check if the paper is reversed (the correct mounting method should be sensor-side up).

    3 Check whether the data line connection between the printer head and the control card is plugged in, and whether it is plugged in or not.

    4 If the above problems are excluded, there is a problem with the hardware.

    Printer FAQ 2: Printer garbled

    Process flow:

    1 Check if there is a problem with the printer driver (if there is a problem reinstall the driver).

    2 printer self-examination, whether garbled (garbled on behalf of the printer control card is bad, not garbled representative may be between the motherboard and the control card data line loose or damaged, it may be the motherboard and control card interface is damaged).

    3 If the machine is charged with static electricity, it will also appear garbled. (The ground wire of the power supply connected to the host must be in good condition and must have a ground wire).

    4 If the above problems are excluded, there is a problem with the hardware.

    Printer FAQ 3: The printer does not absorb paper

    Process flow:

    1 Check whether the paper exit of the machine head is clogged and whether waste paper scraps are inside the machine head.

    2 Check if the printer control card is powered on.

    3 Press the control card's eject button to eject paper.

    4 whether the line is loose.

    5 If the above problem is excluded, there is a problem with the printer control card or head.

    Printer FAQ 4: Printer Does Not Cut Paper

    Process flow:

    1 reinstall the driver.

    2 self-test printing, (such as print self-test can not cut paper, may be a head failure).

    Best choice from SlonParts

  • 21.09.2019 1 Posted By Joe Blogs
    Welcome to YANZEO Blog by SLon Technology Co.,Limited This is your first post. Edit or delete it, then start blogging!
Set Descending Direction

2 Item(s)